Driver Proximity Card Reader (RFID Reader) MR-91T
The MR-91T IP65 proximity card reader (RFID reader) consists of the reader itself and the driver ID card.
The RFID reader connects to a GPS tracker installed on the car’s power supply.
Each driver is issued a contactless card with a personal identification number. Before starting work, the driver must insert the card into the RFID reader so that the system identifies him and makes it possible to start the car engine. (The function of blocking the start of the engine without a card is optional).
From the moment the driver is identified on a certain vehicle, the recording of his working time begins. During non-working hours, the driver must remove the contactless card from the RFID reader.
- Sign (rename) cards
- Assign drivers to a specific vehicle
- Restrict driver access to other vehicles
- Build reports taking into account the working time of the driver
- Analyze driver performance statistics
|Dimensions||85mm x 65mm x 27mm|
|Type of contactless cards||EM Marine, ASK|
|Degree of protection||IP 65|
|Interface for connecting to GPS trackers||RS485, 1-wire|
|Number of cards in the reader’s memory||10,000 + master card|
|Automotive voltage range||9-36V. Dedicated power supply voltage protection, protection against incorrect power connection|
|Operating temperature range||from -25 ⁰С to +60 ⁰С|
|Built-in relay with NO/NC contacts, switching range||up to 2A at 30V DC|
|Relay control||when cards are found in the reader’s memory, the relay turns on for the time the cards are in the reader’s field|
|Indication||1 bicolor LED|
|Sound indication||built-in buzzer|
|Standard driver card reading distance||6-8 cm.|
Leave your details for quick communication